Each locker contains:
1 Fireman's outfit box (G.R.P, segregation compartment type)
1 protective clothing
1 pair of fireman boots
1 pair of fire resistant gloves
1 rigid helmet c/w visor & neck curtain
1 safety lamp
1 fire axe with insulated handle
1 self-contained breathing apparatus (6.8L)
1 life line 40m c/w snap-hook and belt
Approve: CCS
Protective Clothing For Fire Fighting
Flame retardant performance: damage length ≤ 10cm, continuous burning time ≤ 2s, no melting, dripping phenomenon.
Peeling strength: ≥9N/30mm.
Breaking strength: ≥ 650N.
Hydrostatic resistance: hydrostatic pressure ≥17KPa.
High-temperature performance of hard accessories: maintain the original function after 5 minutes at a temperature of 260 ℃.
Fire-Fighting Rubber Boots
The boots weigh about 2.2 kg. Made of fire-retardant rubber, non-slip, anti-static, fireproof, waterproof, oil-resistant, anti smashing and anti puncture. There is a thin steel plate embedded in the bottom of the boots. It has good protection for ankle and feet. The interior of the sole is a lining of sterilized canvas and lined with a sponge bottom. The above products are all in line with national standards and can be used in conjunction with fireman's insulation clothing and chemical protective clothing.
More & Tech Datas
Fire Fighter’s Gloves
Cow-nappa leather
Lining with cut resistant insulation material (100% Para-aramide)
Eurotex membrane
Elastic tightening at the wrist
Kevlar thread
Cow-nappa leather
Lining with cut resistant insulation material (100% Para-aramide)
Eurotex membrane
Elastic tightening at the wrist
Kevlar thread
More & Tech Datas
Fire Fighting Helmet
Components: Helmets, wearing devices, masks, shawls
Impact absorption performance: <3457.6N
Combustion resistance: After the fire source leaves the cap, the flame of the cap is extinguished within 5s, and there is no obvious burning sign inside the cap.
Mask: No obvious deformation or damage after heat resistance test.
Fire helmet material: ABS reinforced plastic, shawl with a comprehensive waterproof flame retardant fabric.
Features: impact resistance, penetration resistance, flame resistance, adjustable wearable device.
Function: Its performance indicators fully meet the requirements of GA44-1997 Fire Helmet Standard.
Handheld Explosion-Proof Light
ZDL-102 aluminum alloy material is used for die casting and coated with high-quality paint.
There is no through hole in the light housing, and the reed switch and the structure of the strong magnetic switch are used to ensure the explosion-proof performance.
The light has a safety locking screw to ensure that the light is not open in flammable and explosive places.It can only be used in a safe place by a special wrench to turn off the light cover when the power is turned off (the spare hex wrench should be kept by someone).
Using a DC power supply, battery 1 * 6 section.
Set photovoltaic beads: 7.2V 0.5A.
Set the illumination: 130LX lamps 10 meters away.
The use of ambient temperature -25℃~ +40℃, the relative temperature of the environment ≤ 90%.
More & Tech Datas
Fireman Axe
Material: carbon steel
Hardness: between 48-52HRC
Weight: 2.8kg
Size: 250*835mm
Advantages: sturdy and durable, easy to carry
Self-contained Breathing Apparatus
DX-marine self-contained breathing apparatus (SCBA) is widely used in fire control, chemical, ship, oil, smelting, electric power, warehouse, laboratory, mine and other key departments for fire fighting, fire, gas, steam, and oxygen. It is a safe and effective for fire extinguishing and rescue. An ideal personal breathing protection device.
More & Tech Datas
Fireproof lifeline
Length : 40m
Diameter : 12mm
Weight: 3.3kg
Breaking load : 5 kN
Material : The inner core of Ф4.2mm aviation steel wire rope, outsourcing double braided twine, elastic hook is made of stainless steel.
More & Tech Datas
Safety Belt
Weight: 0.5kg
Bearing weight : 887.8 kg
Length : 115.5 cm
Width : 7.5 cm
Features: wear resistance, flame retardancy, working pull 4500N
Material : nylon ribbon and metal components.
Weight: 0.5kg
Bearing weight : 887.8 kg
Length : 115.5 cm
Width : 7.5 cm
Features: wear resistance, flame retardancy, working pull 4500N
Material : nylon ribbon and metal components.
More & Tech Datas
Purchase instructions
1.The site currently supports about 10 currencies, please choose the currency you want to pay.
2.For ease of purchase, buyers need only provide receipt information and email. The system will automatically send you an email notification as part of the buyer's purchase voucher.
3. If you need us to design plans for major projects such as shipbuilding, marine engineering, water restaurants, submarine entertainment, sea surfing, etc., please send a direct email to tech@dx-marine.com.
4.In order to prevent you from buying fake and inferior products, please buy it directly from our official website or call the agent and dealer.
5.On logistics: Chinese buyers acquiesced in Shentong and Yuantong. Other regions may need to ship from Hong Kong or Shanghai.